Game Boy Advance Cleanjuice USB C Rechargeable Battery Module Retrosix

Description

Upgrade your Game Boy Advance from its low powered AA battery compartment to a drop-in USB-C rechargeable battery pack.
Adds 6.3Wh of power to your GBA! Charge at any time using a regular USB-C cable, and even reverse charge the console from your phone if it supports power share. That means you can charge your GBA while you are out, using your phone battery. Designed and tested in the UK by Retrosix.
FEATURES:
USB-C battery hole will need to be cut into non IPS ready shells by the user.
If your shell is a RetroSix prestige shell, no need to do anything. If your using a  regular or OEM shell, minor modification is required.
Uses a 1700mAH battery.
No soldering required.
Compatible with Qi receivers.
Connect battery to CleanJuice board (only fits in one way)
Give the CleanJuice a full charge and enjoy well over 14 hours of gaming even with a fully IPS + Audio Amp modded console!
USB-C battery covers sold separately.
USB-C charging cable sold separately.
Indicator Lights:
As the board version has been updated, the orange indicator is no longer a color you will see. You should see the blue light when it is charging, and the light will go off when charge is full. You will see a green light also as long as the cable stays plugged in.
INCLUDED:
1x Cleanjuice board
1x 1700 mAH battery
PAIRS WELL WITH:
Game Boy Advance Prestige Shell
Game Boy Advance USB-C Battery Cover for CleanJuice
USB-C Charging Cable
Installation:
Connect battery to CleanJuice board (only fits in one way so don't worry).
If your shell is a , no need to do anything. If it's regular shell, trim the little stump at the bottom of the battery compartment where the AA batteries usually go so that its flat.
Double sided adhesive is applied on both sides to help keep everything in place.
Place battery into shell with the wire coming out at the top left corner.
Place CleanJuice board in left side first, then push down the right side so that the springs of the CleanJuice make contact with the GBA battery springs.
Use a RetroSix USB-C battery cover (sold separately, in various colors), or cut a hole for the USB-C port using a 4mm drill bit and drill 3 holes in the center of the battery cover as shown in the image.
Put the back cover on the console, and you are ready to go.
Give the CleanJuice a full charge and enjoy well over 14 hours of gaming even with a fully IPS + Audio Amp modded console!
WARNINGS:
Risk of fire if improperly charged or if battery is punctured. Only use protected power sources and USB-C charging cables. Not recommended with power bricks, surge protectors, or Wall Outlet USB Ports.